Selco Seal Gaskets The inherent advantage of the SELCO SEAL over a spiral wound type of gasket has been attested to by many users time and time again. This is why users can install it once and forget it. Fast, easy, foolproof installations means that maintenance and repair labor time is drastically reduced and the "One Size Fits All" will lower overall material inventory costs, without sacrificing store room flexibility. The ratio of maintenance labor costs to gasket costs can easily be 100 to 1. The low leakage (<100 ppm) will allow you to take a PROACTIVE position and meet EPA future leak rate requirements of 500 ppm NOW at NO ADDITIONAL COST. The "Leakless Seal" means that the customer's required periodic leak testing schedule can be stretched, resulting in considerable savings in expensive testing and reporting in time and money spent on maintenance. For Permanent Sealing, Use Selco Seal Selco Seal gaskets are fire safe and prevent blowouts (tested at >5000psi on 2500# flanges). They have excellent tightness characteristics and offer easy installation with no handlling losses. Our gaskets use binderless flexible graphite and there is no loss of seal under wide fluctuations of temperature and pressure. They offer a permanent seal, so you only replace them at maintenance turn arounds. Selco Seal's proven design and superior technology prevent flange damage and are insensitive to flange finish. Our environmentally sound gaskets exceed current and future EPA fugitive emission requirements. Selco Seal can also match gasket material to service conditions. Operating Parameters Selco Style 1530 Selco Style 1530 PTFE / 1530 PTFE and Flexible Graphite